Cable & Circuit Testers
Continuity and Bell Tester
R803.85
- Remotely identify and label two wires using flashing remote probes
- Distance 3000m (26 Gauge min)
- Lightweight and pocket size
The MT100 is a Continuity and Bell Tester that allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. The meter is simple to operate and with proper use will provide years of reliable service. Ideal instrument for electricians, alarm technicians, HVAC installers and many other applications
Specifications
| Function | Range |
| Continuity | Visual and Audio |
| Green | Power on indicator |
| Red | Local Continuity Flashing Red |
| Display | LED Indicators |
| Enclosure | Moulded casing |
| Low Battery Indication | Yes |
| Battery | 9V |
| Weight | 135g |
| Dimensions | 96 x 47 x 33mm |
Downloads
Download “MT100 Instruction Manual”
MT100-Instruction-Manual-2021.pdf – Downloaded 0 times – 550.85 KBDownload “MT100 Technical Datasheet”
MT100-Technical-Datasheet-2021.pdf – Downloaded 1 time – 226.60 KBAccessories
9v Battery
Instruction Manual
Related products
-
Cable & Circuit Testers
Cable Locator
- Detects cables, electrical wire, water/gas supply pipelines concealed in walls and ground
- Detects interruptions and short circuits in cables and concealed electrical wire
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- The transmitter measures voltage from 12V to 400V AC/DC
- The screen of transmitter displays preset transmitting power, transmitted codes and voltage
- Transmitter has self-inspection displaying status on LCD
- Both transmitter and receiver have flashlight function
- Output signal 125kHz
- Detects interruptions and short circuits in floor heating
- The LCD of receiver displays preset transmitting power, transmitted codes and voltage
- The sensitivity of the receiver can be adjusted manually or automatically
- The receiver can sweep frequency automatically
- Identifies fuses and assigned current circuits
- Mute mode can be set for both the transmitter and receiver
- Auto Power Off
- Additional transmitters are available to extend or verify several functions
SKU: MT195 -
Cable & Circuit Testers, Multimeters
2-In-1 LAN Tester and Multimeter
- LED displays the actual pin configuration and tests the correct pin configuration of 100Base-T, 10Base-T, 10Base-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA- 568A/568B and Token Ring cable etc.
- With remote kit it can remotely test cables up to 300m away either on wall plate or patch panel
- Can test the grounding
- Provides easy to read continuity and fault status display
- Measures ACV and DCV up to 600V, ACA and DCA up to 200mA.
- Locked Status wiring function
- LAN Testing
- Tests CAT 5 Installations
SKU: MTC50 -
Cable & Circuit Testers
Digital Cable Length Meter
- 60 000 count backlit LCD display
- Measure up to 30 000m
- 20 pre-set wire gauge settings 0.15mm² to 240mm²
- 8 memory locations in user select mode
- Automatic temperature compensation
- Measures Aluminium (Al) and Copper (Cu) cables and wire
- Measures and indicates Temperature
- User Calibration mode
- Measures in meters (m) and feet (ft)
- Kelvin clip test leads included
- Built-in buzzer
- Auto Power Off
SKU: MT933 -
