The MT915 is a 2-in-1 Cable Finder & Multimeter with an amazing tracing system which will save hours instead of Belling-Out any circuit. The MT915 consists of a transmitter & receiver device which enables one person to instantly match up ends of individual cores at either end of a multi-core cable. With the remote kit the meter can test cables installed over long distances either on wall plates or patch panels. The DMM function makes it easy to measure AC Volts, DC Volts, AC and DC Current, Resistance, Continuity and Diode Test.
Cable & Circuit Testers, Multimeters
2-in-1 Cable Finder & Multimeter
R2,961.25
- Identifies up to 16 cables
- Cuts out “Bell-Out” time
- Cable Resistance 30kΩ max
- Digital multimeter
- 600V AC/DC
- 200mA AC/DC
- Resistance 20MΩ
- Diode Check
- 2000 Count LCD
- Continuity
Specifications
Function | Range | Resolution | Accuracy |
DC Voltage | 200mV – 600V | 0.1mV | ±(1.0% + 3 Digits) |
AC Voltage | 200mV – 600V | 1mV | ±(1.0% + 5 Digits) |
DC Current | 200.0μ A – 200.0mA | 0.1μA | ±(1.5% + 3 Digits) |
AC Current | 200.0μ A – 200.0mA | 0.1μA | ±(1.8% + 8 Digits) |
Resistance | 200.0Ω – 20MΩ | 0.1Ω | ±(1.2% + 3 Digits) |
Overrange Indication | Yes | ||
Input Impedance | >7.5MΩ VDC & >7.5MΩ VAC | ||
Continuity | Yes | ||
Diode Test | Yes | ||
Cable Finder | 16 channels; 30KΩ 1.8mA | ||
Ac Bandwidth | 50Hz – 60Hz | ||
Digital Display | 2000 | ||
Min Max | Yes | ||
Back Light | Yes | ||
Enclosure | Rubber Holster | ||
Batteries | 2 x AAA and 9V | ||
Weight | 308g | ||
Dimensions | 162 x 74 x 43mm | ||
Safety Specs | IEC61010-1 CAT III 600V |
Download
Download “MT915 Instruction Manual”
MT915-MANUAL-2021.pdf – Downloaded 4 times – 303.82 KBDownload “MT915 Technical Datasheet”
MT915-Technical-Datasheet-2021.pdf – Downloaded 2 times – 347.87 KBAccessories
9V Battery
2 x AAA Batteries
Instruction Manual