-
×
CR2 Lithium Battery
1 × R90.85
Subtotal: R90.85 (incl. VAT)
Power Meters
Power Quality Analyser Set
Availability:
Out of stock
R125,350.00
- The perfect tool for energy saving and power quality control
- Simultaneous Power & Power quality measurements Power/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)
- Helpful support functions – Quick Start Guide, Wiring check and Sensor detection for easy and reliable measurement
- Measurement with high accuracy Guaranteed accuracy: ±0.3%rdg (energy), ±0.2%rdg (voltage/current)
- Complies with the International Standard IEC 61000-4-30 Class S and the European Standard EN50160
- Remote monitoring on PC and Android device
- Remote checking of measurement in real-time is possible via Bluetooth communication.
- Recorded data can be saved in the supplied SD card.
- EN50160 report can be generated after survey by PC software.
- Various Clamp Current Sensors – Various types of clamp and flexible sensors are available: from 1000mA Range up to 3000A Range and Earth leakage measurements
- Energy consumption check on site – Trend and demand graphs for easy recognition. TFT color display with high resolution.
- IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V
Out of stock
Request a quote
Power Quality Analyser Set
R125,350.00Easy-to-use settings that simultaneous record of power & power quality measurements in one survey. Major Tech’s Power Quality Analyzer are the perfect tools for measuring energy and power control. The K6315-03 measures Voltage, Current, Frequency, Active power, Reactive power, Apparent power , Active energy, Reactive energy, Apparent energy, Power factor (cosꝊ), Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption/Transients/Over voltage, Inrush, Unbalanced rate), Capacitance calculation for PF correction unit, Flicker.
K6315-03 is supplied as a set complete with the K8130 Flexible Load Current Clamp Sensors
Specifications
| Function | Range | Resolution | Accuracy | Allowable Input | Display Range | Crest Factor |
| Voltage (RMS) | 600.0/1000V | 0.1V | ±(0.2% ±0.2%)f.s.(sine wave,40-70Hz) | 1-120% of each range (rms). 200% of each range (peak) | 0.15-130% of each range | 3 or less |
| Current (RMS) | 100mA-3000A depending on CT selection | 100mA | ±(0.2% ±0.2%)f.s. +accuracy of clamp sensor (sine wave,40-70Hz) | 1-120% of each range (rms). 200% of each range (peak) | 0.15-130% of each range | 3 or less |
| Active Power | ±(0.3% ±0.2%)f.s. +accuracy of clamp sensor (power factor 1 sine wave,40-70Hz) | |||||
| Frequency Range | 40-70Hz | |||||
| Wiring connections | 1P2W, 1P3W, 3P3W, 3P4W | |||||
| Measurements and Parameters | Voltage, Current, Frequency, Active power, Reactive power, Apparent power , Active energy, Reactive energy, Apparent energy, Power factor (cosƟ), Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption/Transients/Over voltage, Inrush, Unbalanced rate), Capacitance caluculation for PF correction unit, Flicker. | |||||
| Other functions | Digital Output function, external communication function, scaling function | |||||
| Sampling Speed | 2.4μs | |||||
| Power source AC | AC100-240V/ 50/60Hz/ 7VA max | |||||
| Power source DC | 6 x LR6 or Ni-Mh, Batt Life ±3hrs | |||||
| Internal Memory | Flash Memory (4MB) | |||||
| PC Card Interface | SD Card (2GB) | |||||
| PC Communication | USB Ver2.0, Bluetooth Ver 2.1 EDR Class2 | |||||
| Display Range | 0.15-130% of each range | |||||
| Display update period | 1 second | |||||
| Enclosure | Rubber Overmold casing | |||||
| Weight | 900g | |||||
| Dimensions | 175 x 120 x 68mm | |||||
| Safety Specs | IEC 61010-1 Cat IV 300V | |||||
| Included Accessories | 7141B (Voltage test lead), 7170 (power cord), 7219(USB Cable), 8326-02 (SD Card 2GB), 9135 (Carry Case), Input terminal plates x 6, Kew windows, Calibration cert, quick manual 6 x LR6 batteries | |||||
Accessories:
Carrying case
AA Batteries
Test leads
Instruction manual
Charger
Software
USB Cable
2GB SD Card
COC
Safety Ratings
