Bluetooth Multifunction Installation Tester
Out of stock
R45,310.00
- Installation 4 ranges 100/250/500/1000V, automatic discharge of capacitance, Polarization Index (PI) and Dielectric Absorption ratio (DAR)
- Loop Impedance High Test current range of 2Ω with 0,001Ω resolution
- RCD Type AC, A, F, B (general & selective) EV (electric vehicle) and variable RCD’s, single and auto test, ramp test and contact voltage
- Earth Resistance test 2 & 3 wires with all accessories
- ACV Trms Voltage measurements 2V to 600V, mains frequency
- Continuity test at 200mA or15mA with selectable buzzer for fast judgment
- Phase rotation on 3-phase lines with clear indication of the sequence on the display
- SPD (Varistor) Surge protection device test, for SPD that uses varistor
- PAT- Portable Appliance Tester function for insulation and continuity
- Connectivity: K6516BT via Bluetooth (to KEW Smart App)
Out of stock
The K6516BT Bluetooth Multifunction Installation Tester are advanced multifunction testers performing 12 separate test functions which are required for SANS 0142 and IEC 61557-10. The multifunction’s include Insulation with PI and DAR, continuity, earth loop impedance, RCD testing, prospective short circuit, prospective fault current, earth resistance, AC Voltage, frequency, phase rotation, SPD (varistor) and PAT (portable appliance testing). The meters can store a maximum of 1000 measured results and the K6516BT downloaded via a K8212- USB adaptor (also an optional accessory for K6516BT) and can transfer data to a tablet or smartphone via Bluetooth using Kew smart*. The K6516BT’s are software driven and guides the user through the colour graphic display, making the meter very user friendly. The K6516BT’s come supplied with a remote test lead for hands free testing. The ATT (anti trip technology) with 2 and 3 wire for no trip Loop L-PE on all RCD’s. With 2 wire only can test with no neutral (eg 3-phase motors).
Specifications
| Function | Range | Resolution | Accuracy |
| Continuity | 20.00/200.0/2000Ω | 0.01Ω | ± (2% + 8 Digits) |
| Insulation resistance | 100/250/500/1000V | 2.000/20.00/200.0/2000MΩ | ± (2% + 6 Digits) |
| Loop range | 20.00/200.0/2000Ω | 0.01Ω | ± (3% + 4 Digits) |
| RCD | x 5, x 1, x 1/2, auto ramp mA | ± (1% + 2ms) | 10/30/50/100/200/500/1000mA |
| Measuring range | 2000ms | ± (1% + 2ms) | |
| Voltage measurement | 300.0/600V | ± (2% + 4 Digits) | |
| Earth resistance | 20.00/200.0/2000Ω | ± (2% + 0.08Ω) | |
| Short circuit current | >200mA | ||
| Rated current | 1 – 1.2mA | ||
| Loop Impedance | L-PE, L-PE(ATT), L-N,L-L | ||
| PSC/PFC | Derived from Loop and Voltage measurement | ||
| Test current | 6A/20mS | ||
| Phase angle | 0° to 180° | ||
| Frequency response | 45-65Hz | ||
| PC Interface | Optional | ||
| Display | Colour LCS 3.5 in dot matrix | ||
| Memory | 1000 Test results | ||
| Back light | Yes | ||
| Enclosure | Moulded case IP54 | ||
| Low battery indication | Yes | ||
| Power source | 8 x LR6 | ||
| Weight | 1300g | ||
| Dimensions | 235 x 136 x 114mm | ||
| Safety specs | IEC61010-1 CatIV 300V | ||
Safety Ratings
Related products
-
Multifunction Testers
Multifunction Installation Tester
- 3.5” TFT colour LCD display 320 x 240 pixels
- Insulation, Continuity, Earth Resistance
- Variable RCD test with Pass/Fail indication
- Line Voltage with Frequency
- Loop and PSC test, Phase Rotation
- Transmit recorded data via Bluetooth / SD Card / USB
- Voltage recording with Graph
- Combined readings on the images
- Safety design with sliding shield plate to avoid electric shock
- Standard accessories include Earth Resistance Spikes and Leads
SKU: MT390 -
Multifunction Testers
PV Insulation Tester
- Accurate measurement of insulation resistance even with Photo Voltaic (PV) arrays generating power.
- Elapsed time measurement
- 1000 data point memory
- Volt Amperometric Earth resistance 2pole and 3pole
- Luminescent buttons and Backlight
- Remote probe test button
- IP54 Water proof design
SKU: K6024PV -
Multifunction Testers
5-In-1 Multifunction Tester
- 5 Test functions
- Microprocessor Controlled for Accuracy and Reliability
- Direct readout of PSC and Earth Fault Current
- Auto power off
- 0˚ and 180˚ phase angle selection
- Tests of a large range of RCD’s
- DC tests for DC sensitive breakers
- Polarity switch for continuity tests Auto-null facility for continuity tests
- Earth probe for loop impedance testing on extraneous metalwork
- Contact voltage measurement
- Loop impedance test with 0.01Ω resolution
- Live circuit warning and visual indication of correct wiring status
- 250V, 500V and 1000V insulation ranges
- IP54 dust and water resistant casing
- Optional accessories K7133 Distribution Board Leads
SKU: K6011 -
Multifunction Testers
Advanced Multifunction Tester
- 10 Test functions
- Slim remote probe with test button for hands free testing
- Microprocessor Controlled for Accuracy and Reliability
- 250V, 50 and 1000V Insulation test ranges
- Auto ramp and auto test for RCD ranges
- Auto power off
- Tests of a large kind of RCD’s including DC tests for DC sensitive breakers
- Anti Trip Technology (ATT) on loop test ranges
- Mains Voltage and Frequency measurements
- Continuity with Auto-null
- Loop impedance test with 0.01Ω resolution
- On-board memory to stores 1000 test results
- Live circuit warning and visual indication of correct wiring status on LED’s
- Direct readout of PSC and Earth Fault Current (PFC)
- UL contact voltage limit of 25V or 50V
- 0° and 180° Phase angle selection
- Phase rotation tester
- Earth Resistance testing
- IP54 dust and water resistant casing
- CAT III 300V and CAT II 600V
SKU: K6016
